Flexx Handlebar Factory-Fresh Kit

Fully rebuild your Flexx Handlebars to feel like new.

Our Factory Fresh kits create an easy way to service your Gen 1, 2, or 3 bars. 

Gen 1 Factory Fresh kit:

 Please note that Gen 1 Factory Fresh Kits have now been discontinued and are no longer available. The gen 1 bar was manufactured until December of 2009, if you're still on a generation 1 bar it's over 12 yrs old. A true testament to the American Made quality you've come to expect from us, and most likely the oldest performance part on your bike. If you're interested in moving over to our current Generation bar, shoot us a call or email, we're happy to help. 0497335399 / sales@fasstcoaustralia.com.au

Bars manufactured previous to August 2010 need periodic service of the pivot points, this kit provides you with all of the necessary parts to perform the service. The Gen 1 Factory Fresh Kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers, your choice of Rebound and Compression Elastomers. Here is an example of Gen 1 Bar grid: 

Gen 2 Factory Fresh kit: The Gen 2 Factory fresh kit is for bars made from August 2010 to March 2014. Typically this generation bar does not need the pivot points rebuilt, but we offer this kit for riders that would like to. The Gen 2 Factory Fresh kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers, your choice of Rebound and Compression Elastomers, 2 handle Fasst bushings and 4 center section Fasst bushings. Here is an example of a Gen 2 Bar grid: 

 Gen 3 Factory Fresh kit: The Gen 3 Factory fresh kit is for bars made from April 2014 and on. Typically this generation bar does not need the pivot points rebuilt, but we offer this kit for riders that would like to. The Gen 3 Factory Fresh kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers, your choice of Rebound and Compression Elastomers, 2 handle Fasst bushings and 4 center section Fasst bushings. Here is an example of a Gen 3 Bar grid: 

Gen 4 Factory Fresh Kit: The Gen 4 bar is our current bar, we made the switch to the Gen 4 in August 2022. The notable difference from gen 3 to gen 4 is the length of the crossbars. For Gen 4 we went to one standard crossbar length. Our atv, enduro, moto, and adventure bars will use SHORT CROSSBARS ONLY. 

Here is an example of a Gen 4 Bar grid, the biggest indicator being "With FB4 Technology": 

Features:

All-inclusive kit

1. No matter what generation Flexx Handlebar you have, we have a kit to rebuild it to a like-new feel.

1. The Gen 2 Factory Fresh kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers, your choice of Rebound and Compression Elastomers, 2 handle Fasst bushings and 4 centre section Fasst bushings.
2. The Gen 3 Factory Fresh kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers, your choice of Rebound and Compression Elastomers, 2 handle Fasst bushings and 4 centre section Fasst bushings.
3. The Gen 4 Factory Fresh kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers, your choice of Rebound and Compression Elastomers, 2 handle Fasst bushings and 4 centre section Fasst bushings.